Man Lift 38 Meter for rent in Jeddah

Man Lift 38 Meter Rental in Jeddah

The 38 m man lift matches the 120-foot class and is rented mostly for refinery shutdowns, tall columns in petrochemical plants and lattice telecom towers, when the smaller sizes fall short.

Available for immediate rental TUV Certified Inspection 24/7 Support
Request a Quote Browse All Equipment

You May Also Like

Swipe for more

About the 38 m man lift (boom lift)

The platform at this size sits at about 36 m, outreach stays around 20–24 m and weight is close to 18–22 t. On paper the gap to the 40 m machine is small, but those two meters can decide whether a worker reaches the top platform of a column or stops below it. Machines here are nearly always telescopic, and most extend their axles before lifting.

On petrochemical sites the work permit settles many details: a spark arrestor on the exhaust, how far the machine stands from live units, a third-party inspection certificate for the machine and an operator card. Collect these from the site safety team and send them with your quote request, because shutdown windows are short and cannot absorb a day lost at the gate.

38 m man lift (boom lift): typical specifications

Working heightapprox. 38 m
Platform floor heightapprox. 36 m
Max horizontal outreachapprox. 20–24 m
Boom typetelescopic
Platform capacityapprox. 230–300 kg
Machine weightapprox. 18–22 t
Operating tilt limittypically 3–5 degrees

Typical values for this size class — they vary by model. The exact figures for the unit available are confirmed with your quotation.

What a 38 m man lift (boom lift) is hired for

  • Refinery shutdowns and turnarounds

    Height and reach together let one machine serve several columns and exchangers with fewer moves during a short shutdown window.

  • Tall columns and reactors in petrochemicals

    Reaches upper maintenance platforms and manways at around 35 m.

  • Lattice telecom towers

    Takes technicians to the mid-section and lower antennas without climbing, cutting the time spent on the structure.

  • Building crowns and rooftop features

    Reaches decorative crowns, feature lighting and rooftop signs on mid-rise buildings.

Is the 38 m man lift (boom lift) the right size?

  • Smaller size36 m man lift (boom lift) — If the top platform or work point is below about 34 m, the 36 m man lift is enough and is easier to place between units.
  • Larger size40 m man lift (boom lift) — If the work is at 36 m or higher, or needs reach over a neighboring unit at that level, move up to the 40 m man lift.

What the 38 m man lift (boom lift) rental includes

  • A trained operator on request
  • Delivery to your site in Jeddah or any city in the Kingdom
  • Inspection before dispatch and scheduled maintenance throughout the contract
  • A replacement unit if the machine fails during the contract
  • Daily, weekly, monthly and long-term contracts
  • Requests and support 24 hours a day

We serve Jeddah and every city in the Kingdom, with dedicated pages for the busiest: man lifts in Jeddah man lifts in Riyadh man lifts in Makkah man lifts in Madinah All service areas

38 m man lift (boom lift) rental questions

What is the practical difference between a 38 m and a 40 m man lift?
Outreach is similar on both; the real difference is two meters of height and a little more weight on the 40 m. If your highest point is 35 m or lower the 38 m is enough; if it is close to 37 m or above, take the extra margin.
How long does a 38 m man lift take to get ready after it arrives?
Once off the lowbed it drives to the work spot, extends its axles on most models, then goes through a pre-use inspection and a test of every function from the ground and the basket. Allow part of the first morning for this, more if site entry needs permits.
Can a welder or generator go in the basket of a 38 m man lift?
Keep heavy welders and generators on the ground and run the leads up along the boom, because their weight eats most of the basket rating. Some models offer a power outlet in the basket; ask if your job needs one.
Do industrial sites require a trained operator for a 38 m man lift?
Usually, yes: most large industrial sites ask for a valid boom-platform training card such as IPAF or an equivalent. If you want an operator from us, state which card the site accepts when you ask for the quote.
International Certifications

ISO Certifications

We are committed to international standards of quality, safety, and environmental management.

ISO 9001
ISO 9001
Quality Management
ISO 14001
ISO 14001
Environmental Management
ISO 45001
ISO 45001
Occupational Health & Safety
Internationally Certified
Global Standards
Certified Quality

Send Your Inquiry Now

We prioritize rapid response time.

Preferred contact method

Need a quick quote? Call us at +966 58 069 9998