Crane 250 Ton for rent in Jeddah

Crane 250 Ton Rental in Jeddah

The 250-ton crane handles lifts that are both heavy and far out: stadium and arena trusses, tall industrial columns, heavy beams. Its boom runs to roughly 70–80 m and its counterweight arrives on several trucks.

Available for immediate rental TUV Certified Inspection 24/7 Support
Request a Quote Browse All Equipment

You May Also Like

Swipe for more

About the 250-ton crane

The 250-ton crane is usually a five-axle all-terrain, with six axles on some models, and on the road it stays close in size to a 200-ton. The difference is more counterweight and a longer boom, giving clearly higher capacity at 30–40 m radius. That counterweight also means more trucks, longer rigging and more space beside the crane.

A lift of this size needs a written lift plan: load weight including rigging gear, radius at the start and end of the lift, ground bearing under the outriggers, and the load path over obstacles. It is usually prepared by the project's lifting engineer from the crane's load chart and configuration. Share the plan or drawings with your request so the crane arrives in the right configuration.

250-ton crane: typical specifications

Maximum rated capacity250 t at very short radius
Main boom lengthapprox. 70–80 m, telescopic
Maximum tip height with lattice jibapprox. 100–115 m
Axlestypically 5–6
Counterweighton several separate trucks
Rigging timeseveral hours, longer with a lattice jib
Outrigger spreadapprox. 9–10 m

Typical values for this size class — they vary by model. The exact figures for the unit available are confirmed with your quotation.

What a 250-ton crane is hired for

  • Stadium and arena roof trusses

    Each piece is heavy and long and is lifted from outside the stands, so it needs capacity at long radius.

  • Upending columns and tall vessels

    Main crane for raising process columns from horizontal, with a smaller crane tailing the bottom end.

  • Heavy beams for roads and rail viaducts

    Places long beams onto piers on bridges and elevated tracks where the crane cannot stand beneath the span.

  • Large tanks and tank roofs

    Lifts tank roofs and upper shell rings at fuel and water storage terminals.

Is the 250-ton crane the right size?

  • Smaller size200-ton crane — If the furthest lift is within about 30 m and the weight fits the 200-ton chart, you save trucks and rigging time.
  • Larger size300-ton crane — If the piece weighs tens of tons beyond about 35 m, or you need real capacity above 100 m, look at a 300-ton crane.

What the 250-ton crane rental includes

  • An operator or driver with the machine for the whole job
  • Delivery to your site in Jeddah or any city in the Kingdom
  • Inspection before dispatch and scheduled maintenance throughout the contract
  • A replacement unit if the machine fails during the contract
  • Daily, weekly, monthly and long-term contracts
  • Requests and support 24 hours a day

We serve Jeddah and every city in the Kingdom, with dedicated pages for the busiest: cranes in Jeddah cranes in Riyadh cranes in Makkah cranes in Dammam cranes in Jubail All service areas

250-ton crane rental questions

How big is the truck convoy with a 250-ton crane?
It depends on how much counterweight the lift needs and whether a lattice jib is required, but it is usually several trucks besides the crane. A lift that needs only partial counterweight needs fewer, so the weight and radius set the size of the convoy before it leaves.
Can a 250-ton crane lift a stadium roof truss?
For many trusses, yes, if the weight including rigging and the maximum radius fall within the chart. Very long trusses may need two cranes lifting together, or splitting into pieces assembled on temporary supports. Send the weight, dimensions and crane position to decide the method.
Should I book a 250-ton or a 300-ton crane?
The 300-ton usually has six axles, a longer boom and more counterweight, so it holds more capacity at long radius and above 100 m. It also brings more trucks and longer rigging, so if the lift fits the 250-ton chart, that is the quicker and simpler choice.
What ground bearing does a 250-ton crane need?
It depends on the load, the radius and the size of the outrigger mats; in heavy lifts the pressure under one outrigger can exceed what natural ground can carry. That is why outrigger loads are calculated in the lift plan, with large mats or a compacted gravel pad where needed.
International Certifications

ISO Certifications

We are committed to international standards of quality, safety, and environmental management.

ISO 9001
ISO 9001
Quality Management
ISO 14001
ISO 14001
Environmental Management
ISO 45001
ISO 45001
Occupational Health & Safety
Internationally Certified
Global Standards
Certified Quality

Send Your Inquiry Now

We prioritize rapid response time.

Preferred contact method

Need a quick quote? Call us at +966 58 069 9998